fabrication

From a pile to a truckload!

After months of fabricating at the shop, we are finally back in Hale! Thanks to Mason, and Shane from Stillwater, we were able to take all the pieces from Jim’s shop to Metal Works, and finally to Morrisette.

The last few pieces the team worked on were for the walkway, which were dry-fitted at the shop before delivering everything to the galvanizing plant.

We are incredibly grateful for the opportunity to have spent time at the shop and become empowered with new metalworking, and welding skills!

Luis at the grill

What is a celebration without tacos? After wrapping up fabrication, Luis and Flo made carne asada and al pastor tacos! A huge shoutout for them, not only for teaching us, and making sure we didn’t injure ourselves but for sharing stories and becoming part of our team.

2,200 Holes and Counting…

Over the last couple of weeks, the Horseshoe Hub Courtyard team has continued to fabricate the screens in the shop, and are nearly done! After working on the shorter eight-foot screens, the team moved on to working on the nine-foot screens that are above the stage and near the main entrance, as well as 18-foot screens and corners. Thanks to the jigs that were fabricated, a small assembly line was created to facilitate making the screens as equally as possible. 

This past week the team finished cutting and perforating all the steel tubes for the footings, walkway strut, and wall plates and started welding the tabs to the wall plates. Also, a huge shoutout to Zane and Cassandra from Blackshop Birmingham for donating the laser-cut plates that make-up most of the walkway, they saved the team weeks worth of work!  

In other exciting news, the team took a trip this past Monday to Hunter Trees LLC and tagged the trees for the courtyard! Thirteen beautiful single trunk, Natchez Crepe Myrtles, which will be planted on site shortly after the screens are up.

Let’s Fabricate, Y’all!

This week the Horseshoe Hub Courtyard team has been in Birmingham at Turnipseed International working on fabricating the eight-foot screens that will be on the north end of the site. Huge thanks to Jim Turnipseed for his continued generosity and his crew Flo and Luis! They’ve learned so much in a short amount of time.

They’ve cut all of the angles (2″x3″x1/4″) and plates (6’x2″x1/4″), mitered, beveled, perforated, and started to weld the corner of the frames. They began fabricating the shorter screens first to get accustomed to working with the material and tools, and understand what jigs they will need.

Stay tuned!